[    0.547310] io scheduler cfq registered
[    0.547362] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.547600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547610] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.547639] intel_idle: MWAIT substates: 0x1120
[    0.547640] intel_idle: v0.4 model 0x2A
[    0.547641] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.547707] ipmi message handler version 39.2
[    0.547747] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.547750] ACPI: Power Button [PWRB]
[    0.547774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.547776] ACPI: Power Button [PWRF]
[    0.548220] GHES: HEST is not enabled!
[    0.548283] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.568689] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.569570] Linux agpgart interface v0.103
[    0.570432] brd: module loaded
[    0.570861] loop: module loaded
[    0.570936] ata_piix 0000:00:1f.2: version 2.13
[    0.570998] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.726704] scsi0 : ata_piix
[    0.726766] scsi1 : ata_piix
[    0.726793] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
[    0.726797] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
[    0.726880] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.727207] scsi2 : ata_piix
[    0.727255] scsi3 : ata_piix
[    0.727280] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.727283] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.727468] libphy: Fixed MDIO Bus: probed
[    0.727520] tun: Universal TUN/TAP device driver, 1.6
[    0.727521] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.727560] PPP generic driver version 2.4.2
[    0.727596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.727598] ehci-pci: EHCI PCI platform driver
[    0.727673] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.727678] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.727689] ehci-pci 0000:00:1a.0: debug port 2
[    0.731589] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
[    0.731599] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    0.742318] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.742346] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.742347] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.742349] usb usb1: Product: EHCI Host Controller
[    0.742350] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.742351] usb usb1: SerialNumber: 0000:00:1a.0
[    0.742425] hub 1-0:1.0: USB hub found
[    0.742430] hub 1-0:1.0: 2 ports detected
[    0.742554] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.742557] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.742567] ehci-pci 0000:00:1d.0: debug port 2
[    0.746477] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
[    0.746487] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    0.758333] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.758390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758392] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758394] usb usb2: Product: EHCI Host Controller
[    0.758395] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    0.758396] usb usb2: SerialNumber: 0000:00:1d.0
[    0.758472] hub 2-0:1.0: USB hub found
[    0.758477] hub 2-0:1.0: 2 ports detected
[    0.758535] ehci-platform: EHCI generic platform driver
[    0.758540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.758541] ohci-pci: OHCI PCI platform driver
[    0.758546] ohci-platform: OHCI generic platform driver
[    0.758550] uhci_hcd: USB Universal Host Controller Interface driver
[    0.758604] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758607] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    0.758746] xhci_hcd 0000:04:00.0: irq 40 for MSI/MSI-X
[    0.758812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.758813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758814] usb usb3: Product: xHCI Host Controller
[    0.758816] usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758817] usb usb3: SerialNumber: 0000:04:00.0
[    0.758879] hub 3-0:1.0: USB hub found
[    0.758887] hub 3-0:1.0: 2 ports detected
[    0.758935] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.758937] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    0.758965] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.758967] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.758968] usb usb4: Product: xHCI Host Controller
[    0.758969] usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
[    0.758970] usb usb4: SerialNumber: 0000:04:00.0
[    0.759030] hub 4-0:1.0: USB hub found
[    0.759037] hub 4-0:1.0: 2 ports detected
[    0.766438] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.766848] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.766853] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.767137] mousedev: PS/2 mouse device common for all mice
[    0.767479] rtc_cmos 00:03: RTC can wake from S4
[    0.767671] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.767698] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.767745] device-mapper: uevent: version 1.0.3
[    0.767803] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.767809] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767879] TCP: cubic registered
[    0.767936] NET: Registered protocol family 10
[    0.768057] NET: Registered protocol family 17
[    0.768065] Key type dns_resolver registered
[    0.768428] Loading compiled-in X.509 certificates
[    0.769139] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    0.769148] registered taskstats version 1
[    0.770773] Key type trusted registered
[    0.772032] Key type encrypted registered
[    0.773230] AppArmor: AppArmor sha1 policy hashing enabled
[    0.773233] IMA: No TPM chip found, activating TPM-bypass!
[    0.773466] regulator-dummy: disabling
[    0.773527]   Magic number: 7:69:752
[    0.773535] ata_link link3: hash matches
[    0.773536]  link3: hash matches
[    0.773546] tty ttyS3: hash matches
[    0.773621] rtc_cmos 00:03: setting system clock to 2015-07-02 21:44:33 UTC (1435873473)
[    0.774063] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.774064] EDD information not available.
[    0.774083] PM: Hibernation image not present or could not be loaded.
[    0.791113] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.054298] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.186571] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.186576] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.186866] hub 1-1:1.0: USB hub found
[    1.186945] hub 1-1:1.0: 4 ports detected
[    1.202286] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.202389] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.210456] ata3.00: ATAPI: ASUS    DRW-24B5ST, 1.00, max UDMA/100
[    1.210518] ata4.00: ATAPI: ASUS    DRW-24B3ST, 1.00, max UDMA/100
[    1.226451] ata4.00: configured for UDMA/100
[    1.226501] ata3.00: configured for UDMA/100
[    1.298288] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.430523] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.430528] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.430810] hub 2-1:1.0: USB hub found
[    1.430888] hub 2-1:1.0: 6 ports detected
[    1.522164] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.702203] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[    1.983277] usb 2-1.3: New USB device found, idVendor=048d, idProduct=1336
[    1.983282] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.983285] usb 2-1.3: Product: Mass Storage Device
[    1.983288] usb 2-1.3: Manufacturer: Generic   
[    1.983290] usb 2-1.3: SerialNumber: 00000000000006
[    2.074044] ata2.01: failed to resume link (SControl 0)
[    2.084798] ata2.00: SATA link down (SStatus 0 SControl 300)
[    2.084811] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.084827] ata1.01: failed to resume link (SControl 0)
[    2.238072] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.238083] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.246798] ata1.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
[    2.246803] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.254794] ata1.00: configured for UDMA/133
[    2.254976] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68J 01.0 PQ: 0 ANSI: 5
[    2.255073] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.255076] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.255096] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.255132] sd 0:0:0:0: [sda] Write Protect is off
[    2.255135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.255161] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.258449] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24B5ST       1.00 PQ: 0 ANSI: 5
[    2.262091] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.262095] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.262252] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.262302] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.265730] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24B3ST       1.00 PQ: 0 ANSI: 5
[    2.269143] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.269279] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    2.269327] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    2.280707]  sda: sda1 sda2 sda3
[    2.281264] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.282313] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    2.282315] Write protecting the kernel read-only data: 12288k
[    2.283866] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    2.285169] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    2.294571] systemd-udevd[135]: starting version 204
[    2.310584] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[    2.311243] scsi4 : usb-storage 2-1.3:1.0
[    2.311314] usbcore: registered new interface driver usb-storage
[    2.312349] [drm] Initialized drm 1.1.0 20060810
[    2.337676] [drm] Memory usable by graphics device = 2048M
[    2.339461] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    2.373991] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.374000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.374001] [drm] Driver supports precise vblank timestamp query.
[    2.374050] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.391766] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.391768] [drm] This can cause pipe underruns and display issues.
[    2.391769] [drm] Please upgrade your BIOS to fix this.
[    2.420938] fbcon: inteldrmfb (fb0) is primary device
[    2.522053] Switched to clocksource tsc
[    2.612362] Console: switching to colour frame buffer device 160x64
[    2.614746] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.614748] i915 0000:00:02.0: registered panic notifier
[    2.614779] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.723886] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.197778] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.310402] scsi 4:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.310658] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.311963] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.489039] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    3.708407] random: nonblocking pool is initialized
[    3.801673] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.211642] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.257216] systemd-udevd[379]: starting version 204
[   16.431062] lp: driver loaded but no devices found
[   16.437412] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   16.440788] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.441595] ppdev: user-space parallel port driver
[   16.445400] parport_pc 00:07: reported by Plug and Play ACPI
[   16.445450] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.463997] media: module verification failed: signature and/or  required key missing - tainting kernel
[   16.464246] media: Linux media interface: v0.10
[   16.465291] Linux video capture interface: v2.00
[   16.465295] WARNING: You are using an experimental version of the media stack.
[   16.465295] 	As the driver is backported to an older kernel, it doesn't offer
[   16.465295] 	enough quality for its usage in production.
[   16.465295] 	Use it with care.
[   16.465295] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.465295] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.465295] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.465295] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.467660] WARNING: You are using an experimental version of the media stack.
[   16.467660] 	As the driver is backported to an older kernel, it doesn't offer
[   16.467660] 	enough quality for its usage in production.
[   16.467660] 	Use it with care.
[   16.467660] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   16.467660] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   16.467660] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   16.467660] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   16.473736] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   16.473951] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xfbdff000
[   16.473960] saa7133[0]: subsystem: 5ace:7290, board: Beholder BeholdTV T7 [card=194,autodetected]
[   16.473975] saa7133[0]: board init: gpio is 0
[   16.474778] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[   16.474784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.474828] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.539593] lp0: using parport0 (interrupt-driven).
[   16.586320] device-mapper: multipath: version 1.6.0 loaded
[   16.602832] saa7133[0]: i2c eeprom 00: ce 5a 90 72 54 20 00 00 00 00 00 00 00 00 00 01
[   16.602842] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602848] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602855] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602860] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602865] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602870] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602874] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602879] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602883] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602888] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602892] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602897] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602901] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602906] saa7133[0]: i2c eeprom e0: a7 1f 01 00 ff ff ff ff ff ff ff ff ff ff ff ff
[   16.602911] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[   16.603444] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   16.610856] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
[   16.611886] xc5000: xc5000_attach(9-0061)
[   16.611888] xc5000 9-0061: creating new instance
[   16.614609] SKU: Nid=0x1d sku_cfg=0x4005e601
[   16.614611] SKU: port_connectivity=0x1
[   16.614612] SKU: enable_pcbeep=0x0
[   16.614613] SKU: check_sum=0x00000005
[   16.614613] SKU: customization=0x000000e6
[   16.614614] SKU: external_amp=0x0
[   16.614615] SKU: platform_type=0x0
[   16.614616] SKU: swap=0x0
[   16.614616] SKU: override=0x1
[   16.614902] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.614903]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.614904]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.614905]    mono: mono_out=0x0
[   16.614905]    inputs:
[   16.614907]      Rear Mic=0x18
[   16.614908]      Front Mic=0x19
[   16.614909]      Line=0x1a
[   16.614910]      CD=0x1c
[   16.614911] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   16.614912] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   16.618832] xc5000: XREG_PRODUCT_ID 2000
[   16.618836] xc5000: Successfully identified at address 0x61
[   16.618837] xc5000: Firmware has not been loaded previously
[   16.618845] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.626829] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20
[   16.626833] xc5000: xc_set_signal_source(1) Source = CABLE
[   16.631987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.632060] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.632114] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.632166] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.632223] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.632280] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   16.642822] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   16.642826] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   16.675510] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   16.690818] xc5000: xc_tune_channel(400000000)
[   16.690822] xc5000: xc_set_rf_frequency(400000000)
[   16.838774] xc5000: *** ADC envelope (0-1023) = 1540
[   16.846770] xc5000: *** Frequency error = 0 Hz
[   16.854786] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2814
[   16.870765] xc5000: *** HW: V0.0, FW: V 0.0.0
[   16.878779] xc5000: *** Horizontal sync frequency = 7332 Hz
[   16.886785] xc5000: *** Frame lines = 4052
[   16.894775] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0
[   16.902775] xc5000: *** Unweighted analog SNR = 58 dB
[   16.910758] xc5000: *** Total gain = 211.80 dB
[   16.910764] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   16.918770] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000
[   17.154186] xc5000: firmware read 16497 bytes.
[   17.154191] xc5000: waiting for firmware upload (dvb-fe-xc5000c-4.1.30.7.fw)...
[   17.154193] xc5000: firmware uploading...
[   17.154195] xc5000: xc5000_tuner_reset()
[   17.367211] init: failsafe main process (707) killed by TERM signal
[   17.773795] Bluetooth: Core ver 2.17
[   17.773809] NET: Registered protocol family 31
[   17.773811] Bluetooth: HCI device and connection manager initialized
[   17.773818] Bluetooth: HCI socket layer initialized
[   17.773821] Bluetooth: L2CAP socket layer initialized
[   17.773825] Bluetooth: SCO socket layer initialized
[   17.777352] Bluetooth: RFCOMM TTY layer initialized
[   17.777363] Bluetooth: RFCOMM socket layer initialized
[   17.777368] Bluetooth: RFCOMM ver 1.11
[   17.778239] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.778241] Bluetooth: BNEP filters: protocol multicast
[   17.778247] Bluetooth: BNEP socket layer initialized
[   18.290244] init: cups main process (783) killed by HUP signal
[   18.290252] init: cups main process ended, respawning
[   19.466218] xc5000: Firmware upload complete...
[   19.498190] xc5000: xc_initialize()
[   19.830128] xc5000: Firmware dvb-fe-xc5000c-4.1.30.7.fw loaded and running.
[   19.830135] xc5000: xc_set_signal_source(1) Source = CABLE
[   19.846116] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   19.846120] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   19.866617] atl1c 0000:05:00.0: irq 44 for MSI/MSI-X
[   19.867179] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   19.887547] init: samba-ad-dc main process (814) terminated with status 1
[   19.894103] xc5000: xc_tune_channel(400000000)
[   19.894105] xc5000: xc_set_rf_frequency(400000000)
[   20.625940] xc5000: *** ADC envelope (0-1023) = 380
[   20.633935] xc5000: *** Frequency error = 31 Hz
[   20.641933] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   20.657935] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   20.665936] xc5000: *** Horizontal sync frequency = 15595 Hz
[   20.673923] xc5000: *** Frame lines = 65535
[   20.681924] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   20.689927] xc5000: *** Unweighted analog SNR = 63 dB
[   20.697925] xc5000: *** Total gain = 124.18 dB
[   20.705935] xc5000: *** PLL lock status = 0x0000
[   20.761924] Registered IR keymap rc-behold
[   20.762007] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input11
[   20.762054] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0
[   20.762056] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-9/9-002d/ir0 [saa7133[0]]
[   20.762282] xc5000: xc5000_sleep()
[   20.762327] saa7133[0]: registered device video0 [v4l2]
[   20.762383] saa7133[0]: registered device vbi0
[   20.762436] saa7133[0]: registered device radio0
[   20.764869] WARNING: You are using an experimental version of the media stack.
[   20.764869] 	As the driver is backported to an older kernel, it doesn't offer
[   20.764869] 	enough quality for its usage in production.
[   20.764869] 	Use it with care.
[   20.764869] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[   20.764869] 	135f9be9194cf7778eb73594aa55791b229cf27c [media] dvb_frontend: start media pipeline while thread is running
[   20.764869] 	0f0fa90bd035fa15106799b813d4f0315d99f47e [media] cx231xx: enable tuner->decoder link at videobuf start
[   20.764869] 	9239effd53d47e3cd9c653830c8465c0a3a427dc [media] dvb-frontend: enable tuner link when the FE thread starts
[   20.764881] saa7134 ALSA driver for DMA sound loaded
[   20.764907] saa7133[0]/alsa: saa7133[0] at 0xfbdff000 irq 17 registered as card -2
[   20.765355] dvb_init() allocating 1 frontend
[   20.766897] xc5000: xc5000_config_radio() frequency=1400000 (in units of khz)
[   20.766900] xc5000: xc5000_config_radio() radio input not configured
[   20.766942] xc5000: xc5000_sleep()
[   20.767374] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   20.769262] i2c i2c-9: Added multiplexed i2c bus 10
[   20.769267] si2168 9-0064: Silicon Labs Si2168 successfully attached
[   20.769280] xc5000: xc5000_attach(9-0061)
[   20.769282] xc5000 9-0061: attaching existing instance
[   20.773908] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   20.773912] xc5000: xc_set_signal_source(1) Source = CABLE
[   20.781964] xc5000: XREG_PRODUCT_ID 14b4
[   20.781967] xc5000: Successfully identified at address 0x61
[   20.781968] xc5000: Firmware has been loaded previously
[   20.781971] DVB: registering new adapter (saa7133[0])
[   20.781976] saa7134 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   20.805904] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   20.805909] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   20.877903] si2168 9-0064: found a 'Silicon Labs Si2168-A30 build 2 id 0'
[   20.893883] xc5000: xc_tune_channel(400000000)
[   20.893885] xc5000: xc_set_rf_frequency(400000000)
[   20.894581] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30b2-01.fw'
[   21.637749] xc5000: *** ADC envelope (0-1023) = 396
[   21.653727] xc5000: *** Frequency error = 109 Hz
[   21.669720] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   21.701711] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   21.717700] xc5000: *** Horizontal sync frequency = 15672 Hz
[   21.733697] xc5000: *** Frame lines = 65535
[   21.749697] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   21.765694] xc5000: *** Unweighted analog SNR = 63 dB
[   21.781694] xc5000: *** Total gain = 124.18 dB
[   21.797701] xc5000: *** PLL lock status = 0x0001
[   21.829741] xc5000: xc5000_config_tv() frequency=6400 (in units of 62.5khz)
[   21.845671] xc5000: xc5000_is_firmware_loaded() returns True id = 0x14b4
[   21.845677] xc5000: xc_set_signal_source(1) Source = CABLE
[   21.877680] xc5000: xc_set_tv_standard(0x8049,0x0c04)
[   21.877684] xc5000: xc_set_tv_standard() Standard = B/G-PAL-NICAM
[   21.973657] xc5000: xc_tune_channel(400000000)
[   21.973662] xc5000: xc_set_rf_frequency(400000000)
[   22.211623] vboxdrv: Found 4 processor cores.
[   22.211794] vboxdrv: fAsync=0 offMin=0x1ea offMax=0xe3a
[   22.211868] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   22.211870] vboxdrv: Successfully loaded version 4.3.26 (interface 0x001a000a).
[   22.421919] vboxpci: IOMMU not found (not registered)
[   22.540235] init: plymouth-upstart-bridge main process ended, respawning
[   22.545349] init: plymouth-upstart-bridge main process (1615) terminated with status 1
[   22.545364] init: plymouth-upstart-bridge main process ended, respawning
[   22.709504] xc5000: *** ADC envelope (0-1023) = 408
[   22.725568] xc5000: *** Frequency error = 468 Hz
[   22.741542] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2
[   22.769429] init: plymouth-stop pre-start process (1664) terminated with status 1
[   22.773470] xc5000: *** HW: V6.0, FW: V 4.1.57374
[   22.789481] xc5000: *** Horizontal sync frequency = 15534 Hz
[   22.805471] xc5000: *** Frame lines = 65535
[   22.821515] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5
[   22.837454] xc5000: *** Unweighted analog SNR = 63 dB
[   22.853479] xc5000: *** Total gain = 124.18 dB
[   22.869453] xc5000: *** PLL lock status = 0x0001
[   22.901571] xc5000: xc5000_sleep()
[   22.902130] xc5000: xc5000_sleep()
[   27.908430] xc5000: xc5000_do_timer_sleep()
[   27.908439] xc5000: xc5000_tuner_reset()
[   27.908482] si2168 9-0064: firmware download failed -5
[   27.908546] xc5000: xc5000_sleep()
[   32.915406] xc5000: xc5000_do_timer_sleep()
[   32.915409] xc5000: xc5000_tuner_reset()
Andrey-Linux ~ # 
